FOCUS
AREA
+
The
N70's
autofocus system offers a choice
of
two
focus
areas: Wide and Spot.
While pressing focus area button, rotate command dial until the
desired symbol
r I for Wide Area or 0 for Spot
Area-
appears
in
LCD panel.
I
For flash photography
When built-in flash is activated
or
accessory Nikon
Speedlight is turned on, Wide Area is automatically
switched over
to
Spot Area.
In
this case, D blinks
in
LCD panel and
OD
appears inside viewfinder.
o Wide Area AF
The Wide-Area focus brackets delineate the focus detecting
area
in
the viewfinder. Subjects of sufficient brightness and
detail can be detected within these brackets.
In
addition to
general photography, autofocus using Wide-Area focus
brackets is suited to action photography
in
which the moving
subject requires a wide-range focus detection area.
However, focus detection may not be possible if the subject
is
too
small
to
fully cover the Wide-Area focus brackets.
If
various
subjects, each at a different distance, fall within the focus
detection area, focus will be confirmed for a single subject as .
follows:
• For subjects
of
equal brightness: the closer one will be
focused.
• For subjects
of
unequal brightness: the brighter one will be
focused.
29
To Next Page
Loading...
Need help?
General
