3
3.1
3.2
20
Load Film
Turn
the power switch on and
load DX-coded film. With
DX-
coded film, film speed will be set
automatically
(ISO
25-5000).
When the camera is turned on,
film
is
loaded and the camera
back
is
closed, the film
automatically
advances to the
first frame.
OX-coded film
~
ISO
~
~
(film
speed)
""
1),
36
,
DX
mark
Turn
the power switch on, confirm that the film
speed setting
is
set to
100,
then open the camera
back by sliding the camera back lock release lever.
125
FS.6
G
.
~
...
tml
.
Gl(
El
• If the film speed setting
is
not set to
liD
, see page
36.
Insert film from the bottom side and pull film leader
out to red index mark .
•
Do
not insert the film leader beyond the
red
index mark.
NOTE:
Loading/removing
film
Shutter curtains are very thin.
Do
not
touch the shutter curtains with your finger
or the film leader.
To Next Page
Loading...
Need help?
General
