Ready-Light/Accessory Shoe
Multi-Sensor Balanced Fill-Flash
Multi-Sensor 8alanced Fill-Flash, without the Distance Information added to
the 3D Multi-Sensor 8alanced Fill-Flash, can be performed with a combination
of the
NBO
/
NBOQD
camera and
CPU
Nikkor lens other than D/G-type.
• Set the camera's exposure mode to any mode other than Manual and
metering system to other than Spot when using built-in Speedlight.
Standard
TIL
Flash
Standard TTL Flash can be performed with non-CPU Nikkor lens.
(Can
only be
used with exposure mode set to Manual) With CPU Nikkor lens, Standard TTL
Flash
is
automatically set when the camera
is
set to Manual exposure mode or
Spot metering when using the built-in Speedlight.
In
Standard TTL Flash,
automatic flash output level compensation
is
not available. This means that,
even though the main subject
is
correctly exposed, the background may not
be. Standard TTL Flash
is
useful when you want to highlight the main subject
or perform flash exposure compensation.
• Monitor Pre-Flash
is
canceled
in
Standard TTL Flash .
• Ready-light
•
r'l
6 0
f~
P I
II
0)
•
When
using the built-in Speedlight or
an
optional Speedlight such
as
the
S8-BOD
X,
S8-50DX, S8-30, S8-29s/
29
, S8-2B/
2BDX,
S8-27, S8-23 or S8-22s, the
ready-light
~
appears
in
the viewfinder when the Speedlight
is
fully charged and
ready to fire.
• If the ready-light blinks appro
x.
3 sec. after full flash output, underexposure
may have occurred (when the Speed light
is
set to TTL or non-TTL auto flash
mode). Check the focus distance, aperture or flash shooting distance range
and shoot again .
• Accessory shoe
•
An
optional Speed light, i
.e
.
S8
-
BODX
,
S8
-
50DX
,
S8
-
30
, S8-29s/
29
, S8-2B/
2BDX
,
S8-27, S8-23
or
S8
-22s can be attached directly to the accessory shoe of the
NBO
/
NBOQD
without a cord. This accessory shoe
is
equipped with a safety lock
which prevents accidental drop when a Speed light with a safety-lock pin
(i.e.
S8-BODX, S8-30, S8-2B/
2BDX
, S8-27,
S8
-26, S8-25 or
S8
-22
s)
is
attached.
79