Auto Exposure Bracketing
• Auto Exposure Bracketing allow you to shoot
in
selected compensated
EV
value (maximum of ±2
EV)
shifting from the automatically set proper
exposure
(or selected exposure
in
Manual exposure mod
e)
for a selected number
of
shots (two
or
three) each time the shutter
is
released. For example, this
is
useful
in
selecting one shot out
of
several shots with Bracketed
exposures after processing the film, when the subject has pronounced
contrast
in
shooting with color slide film and where the latitude
of
the
proper exposure
is
minimal. Auto Exposure Bracketing can be
performed
in
any exposure mode.
1
Rotate the Main-Command Dial while pressing the
Auto Exposure Bracketing
om
button
so
mrtJ
appears
in
the LCD panel.
• When
m:tJ
appears, ~ starts blinking.
• Shutter speed and aperture
in
Auto-Multi Program, aperture
in
Shutter- I
Priority Auto and shutter speed
in
Aperture-Priority Auto and Manual
exposure mode differ.
•
In
any of the exposure modes, Flash Exposure Bracketing and Auto
Exposure Bracketing are simultaneously performed when a Speedlight
is
used.
2
Set the number of shots and compensated
EV
value
by rotating the Sub-Command Dial while pressing the
Auto Exposure Bracketing
om
button .
• See the table
on
the next page for the combinations of the number of shots
and compensated
EV
value.
61