To Next Page

To Previous Page

INTRODUCTION

This manual will help you get the most from your Nilﬁ sk Rider Scrubber. Read it thoroughly before operating the machine.

Note: Bold numbers in parentheses indicate an item illustrated on pages A-6 – A-9.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Nilﬁ sk Service Center, who employs factory trained service personnel, and maintains an inventory

of Nilﬁ sk original replacement parts and accessories.

Call the NILFISK DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

MODIFICATIONS

Modiﬁ cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user without prior written

approval from Nilﬁ sk A/S. Unapproved modiﬁ cations will void the machine warranty and make the customer liable for any resulting accidents.

NAMEPLATE

The Model Number (also known as Part Number) and Serial Number of your machine are shown on the Nameplate, located on the steering column of the

machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Part Number and Serial Number of your

machine for future reference.

PART NO. ____________________________________________________

SERIAL NO. __________________________________________________

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping carton (if

applicable) so that it can be inspected. Contact the Nilﬁ sk Customer Service Department immediately to ﬁ le a freight damage claim. Refer to the unpacking

instruction sheet included with the machine to remove the machine from the pallet.

TRANSPORTING THE MACHINE

CAUTION!

Before transporting the machine on an open truck or trailer, make sure that . . .

• All tanks are empty.

• All access doors are latched securely.

• The machine is tied down securely - see Tie Down Point locations (25).

• The machine’s electromagnetic brake is engaged (not manually overridden).

• Lower the scrub deck and squeegee then press Emergency Stop Switch (U) or disconnect batteries to prevent them from raising when the machine is

powered off.

• The machine is turned off and the magnetic smart key is removed.

4/2016 A - 3 56091168 - SC6000