Ninja BL780C User Manual

www.ninjakitchen.com
10
English
Assembly and Use for the 2.15 L Pitcher
IMPORTANT: Make sure that the motor base is plugged
in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Pitcher onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the “ LOCK ”
symbol on the motor base.
3 Rotate the pitcher clockwise as far as it will go to lock in
place. (Fig. 2)
4 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
(Fig. 3a, Fig. 3b)
5
Holding the Total Crushing
™
Blade Assembly by the top of
the shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the pitcher, making sure that they
do not exceed the highest measured marking line on the
side of the pitcher.
NOTE: If you need to add additional ingredients while the
appliance is processing, open the pour spout cap and
pour the ingredients in through the opening.
7 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the pitcher and lid
are not installed correctly. When the pitcher and lid are
installed properly, the power button ( ) will be solid,
indicating that the appliance is ready for use.
8 Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the arrow ( ) located on
the lid with the arrow ( ) located on the pitcher’s handle.
(Fig. 5) Press the handle down until you hear a click.
Fig. 3b
Fig. 2
Fig. 1
Fig. 4
Fig. 5
Assembly
Fig. 3a

Ninja BL780C Specifications

General

Brand	Ninja
Model	BL780C
Category	Blender
Language	English