Ninja BL780C User Manual

13
1-877-646-5288
Assembly and Use for the 1.8 L Bowl
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the “LOCK”
symbol on the motor base.
3 Rotate the bowl clockwise as far as it will go to lock in
place. (Fig. 2)
4 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5 Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7 Plug the power cord into the electrical outlet and press
the power button (
).
NOTE: As a safety feature, the power button (
) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid are
installed properly, the power button ( ) will be solid,
indicating that the appliance is ready for use.
8 Holding the lid by the handle in the upright position, place
it on top of the bowl aligning the arrow (
) located on
the lid with the arrow ( ) located on the bowl’s handle.
(Fig. 5) Press the handle down until you hear a click.
NOTE: The 1.8 L bowl is not intended for blending
drinks. Do not overfill.
Fig. 1
Fig. 2
ASSEMBLY
Fig. 3a
Fig. 3b
Fig. 4
Fig. 5

Ninja BL780C Specifications

General

Brand	Ninja
Model	BL780C
Category	Blender
Language	English