www.ninjakitchen.com
16
English
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or
any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher, Nutri Ninja
™
cup and bowl in the
dishwasher. Place the lids and attachments on the top
rack. Use caution when handling the blade assemblies as
the blades are very sharp.
NOTE: You may also wash the containers by filling ¾ of
the container with warm water and a drop of dish washing
detergent, placing the corresponding lid on the container
and pressing the pulse button a few times. Once clean,
remove the container from the motor base. Rinse the
container, attachment and lid under running water. Allow
all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Ninja
®
Supra Kitchen System
™
upright with
the pitcher on the motor base, Total Crushing
™
Blade
assembly inside the pitcher and lid on the pitcher. Do not
place anything on top. Store the bowl with the 4-Blade
assembly inside and the lid on top. S
tore the Nutri
Ninja
™
cup and the rest of the attachments along side
the appliance or in a cabinet where they will not be
damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Supra Kitchen System
™
features a unique
safety system which prevents damage to the unit’s motor
and drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the motor
will stop and the power light will remain lit and speeds
DOUGH, BLEND and CRUSH will flash. To reset the
appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General
