20 21ninjakitchen.com
USING THE SLICING/SHREDDING DISC
IMPORTANT: Use only the LOW setting
when using the Slicing/Shredding Disc.
5 Use the finger holes to grasp the disc and
place it over the disc spindle.
4 Place the disc spindle inside the bowl.
6 Place the feed chute lid on the bowl and
turn clockwise until you hear a click,
indicating the lid is locked in place.
7 Touch the power button to turn the unit on.
8 Select LOW on the control panel. The
disc will begin spinning.
NOTE: The feed chute lid features
a two-part pusher to guide food
through the chute. Use the full pusher
for larger items such as cucumbers.
Twist and pull to remove the smaller
pusher and use the narrow chute for
smaller items such as carrots.
NOTE: The Slicing/Shredding Disc
is reversible. Use the side labeled
“Slicer” for slicing. Carefully flip
the disc over to the side labeled
“Shredder” for shredding.
3 Secure the bowl onto the motor base.
Rotate bowl clockwise until it clicks
into place.
1 Place the unplugged motor base on
a clean, dry, level surface such as a
countertop or table. Press downward
on the motor base to adhere the suction
cups to the work surface. Plug the
motor base into a wall outlet.
2 Lower the Precision Processor® Bowl
onto the motor base.
9 Add the ingredients you want to slice
or shred through the feed chute on the
lid. Use the two-part food pusher to
help guide the ingredients through the
feed chute. The middle piece of the food
pusher is removable to use for smaller
ingredients.
10 When finished, stop the unit by touching
the power button and wait for the disc
to stop turning. Press the button on the
feed chute lid located near the handle to
unlock, then turn the lid counterclockwise.
Lift the lid from the bowl.
11 Using the finger holes, carefully lift the
Slicing/Shredding Disc out of the bowl.
12 Grasp the spindle by the top of the
shaft and lift it out of the bowl.
14 Unplug the unit when finished. To lift
the motor base, place your hands
underneath both sides of it and gently
pull the unit up and toward you. Refer
to the Care & Maintenance section for
storing instructions.
13 To remove the bowl from the motor
base, turn the bowl counterclockwise
and then lift it.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
To Next Page
Loading...
Need help?
General