3. Getting Started
QUICK START
If you have a fully charged battery and a miniature SIM card
at hand, to get the phone ready for use quickly do as follows:
➊
Remove the battery. (See The SIM Card in this chapter.)
➋
Install the SIM card. (See The SIM Card.)
➌
Install the battery. (See The SIM Card.)
➍
Switch on the phone by pressing and holding the key
for a second. A tone is heard and the phone backlight
will come on.
➎
If the phone requests the PIN code (delivered with the
SIM card), key it in and press the left selection key.
➏
Check that the signal strength indicator (and the bar above
it) and the operator’s name are shown. Pull the antenna
fully out for better reception.
➐
Now the phone is ready for your first call:
You can clear the display by pressing and holding the
C
key.
Key in the area code and phone number of the per-
son you wish to call.
Press to dial the number.
Wait for the answer, then speak.
After you have finished your conversation, press
to end the call.
➑
If the texts on the display are not shown in English, do as
follows:
You can clear the display by pressing and holding the
C
key.
Press the left selection key.
Press four times.
NHE-4NX (2110 model II)
9350586 (en) ISSUE 5
9350637 (issue 3)
NHK-4NX (2140)
9350693 (en)
ISSUE 3
NHE-4NY (2118)
9350593 (en)
ISSUE 5
NHK-4NY (2148)
9350696 (en)
ISSUE 3
Getting Started
14
To Next Page
Loading...
Need help?
General
