102Copyright © 2006 Nokia. All rights reserved.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the service and
settings for use.
You may receive the settings for connecting to the service from your network
operator or service provider. See “Configuration settings service,” p. 18. You can
enter the settings manually. See “Configuration,” p. 82.
To select the settings for connecting to the service, select Menu > Push to talk >
Config. settings. Select from the following options:
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account contained in the active configuration
settings
PTT user name, Default nickname, PTT password, Domain, and Server address
To edit the PTT settings for use, select Menu >Push to talk > PTT settings.
To select the phone to allow the reception of incoming one-to-one calls, select 1
to 1 calls > On. To make but not receive one-to-one calls, select Off. The service
provider may offer some services that override these settings. To set the phone to
first notify you of incoming one-to-one calls with a ringing tone, select Notify.
To activate the listened groups, select Listened groups > On.
To set the phone to automatically connect to the PTT service when you switch the
phone on, select PTT status in startup > Yes.
To hide your PTT address from group and one-to-one calls, select Send my PTT
address > No.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
