79Copyright © 2006 Nokia. All rights reserved.
Modem settings
You can connect the phone using an IR or a data cable (CA-42) connection to a
compatible PC, and use the phone as a modem to enable packet data connectivity
from the PC.
To define the settings for connections from the PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, activate
the access point you want to use, and select Edit active access point. Select Alias
for access point, and enter a nick name for the currently selected access point.
Select Packet data access point, and enter the access point name (APN) to
establish a connection to an EGPRS network.
You can also set the dial-up service settings (access point name) on your PC using
the Nokia Modem Options software. See “PC Suite,” p. 132. If you have set the
settings both on the PC and on your phone, the PC settings are used.
■ Call
Select Menu > Settings > Call and from the following options:
Automatic volume control — to set the phone to automatically adjust the speaker
volume according to the background noise
Call divert (network service) — to divert your incoming calls. You may not be able
to divert your call, if some call barring functions are active. See Call barring service
in “Security,” p. 83.
Anykey answer > On — to answer an incoming call, briefly press any key, except
the end key and the left and right selection keys.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
