©2002 Nokia Corporation. All rights reserved.
Menu functions
52
Call settings (Menu 6-1)
• Automatic redial: You can set your phone to make up to ten attempts to connect the call after an
unsuccessful call attempt.
• Speed dialling: When this function is on, you can dial the names and phone numbers assigned to
the speed dial number keys 2 to 9 by pressing and holding the corresponding key.
• Call waiting options: When this network service is activated, the network notifies you of a new
incoming call while you have a call in progress.
• Own number sending: You can set your phone number to be displayed (On) or hidden (Off) from the
person you are calling (network service). When you select Set by network, the setting that was
agreed upon with your service provider is used.
• Phone line in use: The phone may be used with a SIM card that supports two phone lines. With this
network service, you can select the phone line 1 or 2 for making calls or prevent line selection. Calls
on both lines can be answered irrespective of the selected line.
You will not be able to make calls if you select line 2 and you have not subscribed to this network
service. When line 2 is selected, 2 is displayed in standby mode.
Note that to allow or prevent line selection, you need the PIN2 code.
• Automatic answer: You can set your phone to answer an incoming call after one ring when the
phone is connected to the HDD-2 headset.
Phone settings (Menu 6-2)
• Language: You can select the language for the display texts.
To Next Page
Loading...
Need help?
General
