130Copyright © 2005 Nokia. All rights reserved.
Making a connection to a service
Make sure that the service settings of the service you want to use are activated. To
activate the settings, press Menu, and select Web, Settings and Configuration
settings. Select Configuration and select the configuration set you want to
activate.
Make a connection to the service. There are several ways to connect:
• Open the start page, for example, the home page of the service provider: press
Menu, and select Web and Home, or in standby mode press and hold .
• Select a bookmark of the service: press Menu, and select Web, Bookmarks, and
select a bookmark. If the bookmark does not work with the current active
service settings, activate another set of service settings and try again.
• Select the last URL: press Menu, and select Web, Last web addr..
• Key in the address of the service: press Menu, and select Web and then Go to
address. Key in the address of the service and press OK.
Browsing the pages of a service
After you have made a connection to the service, you can start browsing its pages.
The function of the phone keys may vary in different services. Follow the text
guides on the phone display. For more information, contact your service provider.
Note that if GPRS is selected as the data bearer, the indicator is shown on the
top left of the display during browsing. If you receive a call or a text message, or
make a call during an (E)GPRS connection, the indicator will be shown on the
top left of the display to indicate that the (E)GPRS connection is suspended (on
To Next Page
Loading...
Need help?
General
