©2002 Nokia Corporation. All rights reserved.
Menu functions
61
Menu functions
Select the divert option you want, for example, select Divert if busy to divert the voice calls when your
number is busy or when you reject an incoming call.
To set the divert setting to on, select Activate, to set the divert setting to off, select Cancel, or Check
status to check whether the divert is activated or not. To change the timeout when the call is diverted,
first select Set delay if this is available for the divert option, and then select Activate to set the divert
setting to on. Several divert options may be active at the same time.
To see the divert indicators in standby mode, see Standby mode on page 19.
Anykey answer
Press Menu, select Settings, Call settings and then Anykey answer. Select On and you can answer an
incoming call by briefly pressing any key, except , selection keys and , and .
Automatic redial
Press Menu, select Settings, Call settings and Automatic redial. Select On and your phone will make a
maximum of ten attempts to connect the call after an unsuccessful call attempt.
Speed dialling
Press Menu, select Settings, Call settings and Speed dialling. Select On and the names and phone
numbers assigned to the speed dialling keys, from to , can be dialled by pressing and
holding the corresponding number key.
Call waiting service
Press Menu, select Settings, Call settings and Call waiting service. Select Activate and the network will
notify you of an incoming call while you have a call in progress (network service). See Call waiting on
page 32.
To Next Page
Loading...
Need help?
General
