©2002 Nokia Corporation. All rights reserved.
Menu functions
82
When the connection security is On, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. Settings for the selected bearer, see Settings when GSM
data is the selected data bearer and Settings when GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact your network operator or service
provider.
Settings when GSM data is the selected data bearer
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press for a period, and press OK. You obtain the IP address
from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic. Automatic is available only
if the current selected data call type is Analogue. The actual data call speed depends on the service
provider.
• Login type - Select Manual or Automatic. If you select Automatic, the login type uses the user name
and password keyed in the following settings. If you select Manual, the login information is
required when establishing a connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
To Next Page
Loading...
Need help?
General
