Settings
55
Connect to a TTY device
Your phone uses the HDA-12 TTY phone adapter to connect to a TTY device.
1. Connect the HDA-12 phone adapter to the headset connector on your phone.
2. Select Menu > Settings > Accessories > Text phone > Use TTY > Yes.
Note: If the HDA-12 phone adapter is not connected, the Text phone
menu will not be displayed. The TTY icon is displayed on the Home
screen when the phone adapter is connected.
3. Connect the TTY device cable to the HDA-12 phone adapter.
Note: The TTY device cable is supplied with the TTY machine by the
TTY manufacturer.
Important: You must connect the HDA-12 phone adapter to the phone
before connecting the TTY device cable to the adapter. If you connect the
HDA-12 phone adapter to the TTY device cable, and then to your phone,
the message Accessory not supported is displayed.
■ Configuration
You can configure your device with settings required for certain services to
function correctly. Your service provider may also send you these settings.
Select Menu > Settings > Configuration and from the following:
Default configuration settings— View the service providers saved in the device.
To set the configuration settings of the service provider as default settings, select
Options > Set as default.
Activate default in all applications— Activate the default configuration settings for
supported applications.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
