Copyright
©
2006 Nokia. All rights reserved.
Camera
15
Record videos
If the camera is in image mode, to select video mode, select
Options > Video mode.
To select the secondary camera (for example, to include
yourself in the video), select Options > Use second. cam..
To use the main camera again, select Options > Use main
camera.
The zoom indicator, which appears on the side pane, shows
the zoom level. Press or to zoom in or zoom out.
1 Press to start recording. The record icon is
shown. The LED flash is lit, and a tone sounds,
indicating to the subject that video is being recorded.
There is no flash effect on the resultant video.
2 To pause recording at any time, select Pause. The pause
icon blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no key presses within a minute.
3 Select Continue to resume recording.
4 Select Stop to stop recording. The video clip is
automatically saved to the Images & videofolder of
Gallery. See "Gallery", on page 9.
To select the shooting mode; colour and lighting settings;
or view the Last video clip before recording a video, see
"Video recorder setup", on page 15.
After a video clip is recorded, do the following:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, select Options >
Delete.
• To return to the viewfinder to record a new video,
press .
• To send the video Via multimedia, Via e-mail, or Via
Bluetooth, or Via infrared, select Options > Send. For
more information, see "Messaging", on page 28 and
"Bluetooth connectivity", on page 73. This option is not
available during an active call.
• To send a video clip to the other party during an active
call, select Options > Send to caller.
• To edit the video, select Options > Edit. See also "Edit
video clips", on page 19.
Video recorder setup
If the viewfinder is active, press or , or select
Options > Open setup.
Press or to choose the item to be viewed or
adjusted, and press . The settings available depend on
which camera is in use.
To reactivate the viewfinder, press Cancel or .
The settings return to the default settings when you close
the Camera.
9243184_N71-1_en_apac.book Page 15 Friday, May 26, 2006 2:31 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
