Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
08.Jan.2007
28
Service Manual N95 RM-159/RM-245
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(58)
1. Assembly.
2. Remove the protective lm from the 1UJ FLASH MODULE.
3. Align the module exactly to the alignment tabs.
4. Smooth it down evenly. Note the components.
5. Now position the connector side.
6. Do not bend the connector springs while pushing down.
LOWER BLOCK ASSEMBLY14.