ID50 Series Panel - Operating Manual
Operator Actions at Panel
35 997-264-000-8, Issue 8
January 2007
4.11.1 Time - User Option
The Time User Option allows the user to enter or edit the
current time displayed on the LCD. To edit the time,
proceed as follows:
1 Press the ‘
1
’ pushbutton on the numeric keypad to
select the Time option.
2 The LCD displays the Enter New Time prompt. Using
the numeric keypad, enter the numbers directly. All
digits are automatically entered into position from left
to right on the display.
After entering the last digit, press the ‘
5
’ to confirm
and return to the CLOCK menu.
Note: The entered time must be in the 24-hour clock
format (e.g. for 07:11 pm, enter 1911).
If an invalid time is entered, the LCD displays an error
message and then re-displays the Clock menu.
[U0 Clock] 1 : Time 2 : Date
ENTER NEW TIME (format hh : mm)
- - : - - <:Cancel
ENTER NEW TIME (format hh : mm)
19 : 11 <:Cancel
[U0 Clock] 1 : Time 2 : Date
ENTER NEW TIME (format hh : mm)
91 : 11 <:Cancel
Invalid Value Entered !
[U0 Clock] 1 : Time 2 : Date
1
1
1
1
1
1
5
51
9
9
To Next Page
Loading...
Need help?
General
