Notifier INA User Manual

INA 15092:I 05/30/01
39
SECTION 2 FIRE ALARMS
The following example illustrates the system format used to display fire alarm conditions received from an AM2020/
AFP1010, AFP-300/400 or AFP-200 system. For more information refer to the AM2020/AFP1010 Manual and for type ID
definitions see the Software Type ID section of the AM2020/AFP1010 Programming Chapter. Messages on the AFP-200 or
AFP-300/400 fire alarm panels are different than those displayed on the INA or NCS (see Table 2.0-1).
Node Address
(Range is from 1 to 240)
Device Status
Device Address
(Range is from 01-99)
Time and Date
Hour:Minute Month/Day/Year
Software Zone Label
of the first software zone that
the device was mapped to
during programming of the
network node.
ALARM: N211 PHOT@@@@@@@@ COMPUTER ROOM
FOURTEENTH FLOOR 04:32P 03/01/00 124
NOTE: The piezo sounder will pulse for fire alarm conditions.
Loop Number
(Range is from 1 to 9, with 0=Loop 10)
Custom Device Label
that was entered during
programming of the AM2020/
AFP1010 network node.
SEPYTECIVED
rotceteDeludoM
THPFNMCN
RHTFLUPM
REHTNOM
DNOILLUP
HNOINOCS
NOIRPUS
TOHPTAW
TAEHTCAD
RSALKMSM
TLUMTHM
FERA)knalb(
VOHPRNAM
VNOILDRM
BMOC
USPS
www.PDF-Zoo.com

Notifier INA Specifications

General

Brand	Notifier
Model	INA
Category	Smoke Alarm
Language	English