48
INA 15092:I 05/30/01
Custom Device Label
that was entered during
programming of the
network node.
TROUBL@@N211@@@@@@PHOT @COMPUTER ROOM
Z087@MAINTENANCE@@REQ 04:32P 03/01/00 124
Device Status
Software Zone
The first zone that
the device was
mapped to during
programming of the
network node.
Time and Date
Hour:Minute Month/Day/Year
Loop Number
(Range is from 1 to 9, with 0=Loop 10)
Device Address
(Range is from 01-99)
SECTION 3 SE CURITY ALARM, SUPERVISORY AND TROUBLE SIGNALS
3.1 SECURITY ALARM, SUPERVISORY, AND TROUBLE SIGNALS FROM AM2020/AFP1010,
AFP-200
AND AFP-300/400 SLC DEVICES
The following example illustrates the format used to display security alarms, supervisory, and trouble signals received from
an AM2020/AFP1010, AFP-300/400 and AFP-200. Refer to the AM2020/AFP1010, AFP-200 and AFP-300/400 Manuals.
The INA will only display security alarm, supervisory, and trouble signals for the network nodes that have been pro-
grammed into the INA.
NOTE: The piezo sounder will sound steadily for unacknowledged security alarm, supervisory, and trouble conditions.
Node Address
(Range is from 1 to 240)
NOTE: For a more
detailed explanation
of Software Type
Identification, refer to
the Programming
Chapter in the
AM2020/AFP1010
Manual or the AFP-
200 and AFP-300/400
Manuals.
SELBUORTFOSEPYT
rotceteDeludoM
TSETDELIAFTEDDELBASIDECIVEDTRELAYTIRUCES
DELBASIDECIVEDYLPERDILAVNIMOCONYTIRUCES
ECNARELOTTFIRDTIUCRICNEPOREPMATYTIRUCES
YLPERDILAVNIELBUORTTNIOPTIUCRICTROHS
EULAVREBMAHCWOLMRALAYTIRUCESELBUORTRELKNIRPS
QERECNANETNIAM
TRELAMRALA-ERP
AFP-300/400 bell
circuit range is B01-
B04
AFP-300/400 panel
circuit range is P11-
P88
SEPYTECIVED
rotceteDseludoM
THPFNOMADNPGLUPNRKPSTAW
RHTFDNPASAGNOMREYTCRT
REHTMRASAGVEGAPMLDRM
DNOICXMCCAGRNONRNAM
HNOINOCCSSELET)knalb(
NOITCADLBERLBCRTHM
TOHPMQESTKCRLERIUSPS
TAEHLERCLURCRTSRPUS
RSALLLEBCMFRAONMYSS
TLUMNROHDUARANONELET
FERABDUACTGEGAPBRTM
OBMCRKPSCFWCRWPDNPT
VOHPMCRFSFWLLUPSRT
VNOICROFNMCNNOCSKMSM
www.PDF-Zoo.com
To Next Page
Loading...
Need help?
General
