Novation Launchkey MK3 User Manual

19
Controlling the Launchkey MK3’s features
Some of the Launchkey MK3’s features can be controlled by MIDI messages. All functionality described
in this chapter are accessible through the LKMK3 DAW In / Out (USB) interface only.
Arpeggiator
The Arpeggiator may be controlled by Control Change events on Channel 1 (Midi status: B0h, 176) on
the following indices:
- 6Eh (110): Arpeggiator On (Nonzero value) / Off (Zero value).
- 55h (85): Arp type. Value range: 0 – 6, see below.
- 56h (86): Arp rate. Value range: 0 – 7, see below.
- 57h (87): Arp octave. Value range: 0 – 3, corresponding to octave counts 1 – 4.
- 58h (88): Arp latch On (Nonzero value) / Off (Zero value).
- 59h (89): Arp gate. Value range: 0 – 63h (99), corresponding to lengths 0% - 198%.
- 5Ah (90): Arp swing. Value range: 22h (34) – 5Eh (94), corresponding to swings -47% - 47%.
- 5Bh (91): Arp rhythm. Value range: 0 – 4, see below.
- 5Ch (92): Arp mutate. Value range: 0 – 127.
- 5Dh (93): Arp deviate. Value range: 0 – 127.
Arp type values:
- 0: Up
- 1: Down
- 2: Up/Down
- 3: As Played
- 4: Random
- 5: Chord
- 6: Mutate
Arp rate values:
- 0: 1/4
- 1: 1/4 Triplet
- 2: 1/8
- 3: 1/8 Triplet
- 4: 1/16
- 5: 1/16 Triplet
- 6: 1/32
- 7: 1/32 Triplet
Arp rhythm values:
- 0: Note
- 1: Note – Pause – Note
- 2: Note – Pause – Pause – Note
- 3: Random
- 4: Deviate

Novation Launchkey MK3 Specifications

General

Brand	Novation
Model	Launchkey MK3
Category	Recording Equipment
Language	English