Nulite NL-BKDX40-150II/R32 User Manual

33
2. Wire Controller Parameters Query Form
NO.
Setting data description
Unit
Numerical range
Defaults
Remarks
1
Power-off memory
mode
-
On=0 ； OFF=1
0
The power-off memory setting of the
line controller itself does not need to be
sent to the internal machine.
On=0: restore the state before
power-off after power-off
OF=1: Standby after power off
2
Temperature unit
conversion
-
C=0 ； F=1
0
C: Celsius temperature;
F: Fahrenheit temperature
3
Fan coil
-
0: invalid; 1: valid
1
When this setting is 0, the cooling
mode is not selectable
4
Link switch
-
0: invalid; 1: valid
1
When the fan selection is invalid, it
will be automatically adjusted to 0
5
Heating mode
-
0: floor heating; 1: fan
coil
1
When the fan selection is invalid, it
will be automatically adjusted to 0
6
Energy saving function
-
0: invalid; 1: valid
0
7
Emergency mode
-
0: invalid; 1: valid
1
8
Electric heating start
outer ring temperature
℃
-21 To 10
-20
When set to -21 degrees, the electric
heating function is turned off
(protection function
(Except for power), need to set
EEPROM)
9
Water pump anti-rust
-
0: invalid; 1: valid
0
The pump runs regularly during standby
10
Heating high water
temperature
℃
40
～
80
49
When heating, the actual inlet water
temperature value is greater than the
set value
Time, water temperature compensation
(need to set EEPROM)
11
Cooling low water
temperature
℃
20～10
12
When cooling, when the actual inlet
water temperature value is less than the
set value, water temperature
compensation (EEPROM needs to be set)
12
Automatic temperature
regulation (OTC) (screen
shield)
-
0: invalid; 1: valid
0: invalid
13
OTC correction value
(shielded)
℃
-8 To 8
0
Automatic temperature adjustment
correction value
14
High ambient
temperature (shielded)
℃
06-25
20

Nulite NL-BKDX40-150II/R32 Specifications

General

Brand	Nulite
Model	NL-BKDX40-150II/R32
Category	Heat Pump
Language	English