Oce fx3000 Quick Setup Guide

31
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1 Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2 Turn on your Macintosh
®
.
3 Insert the supplied CD-ROM into your CD-
ROM drive.
4 Double-click the Start Here OSX icon to
install the drivers and Multi-Function Suite.
If the language screen appears, choose
your language.
5 Follow the on-screen instructions, and
restart your Macintosh
®
.
6 After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
7 Plug in the power cord and turn on the
machine.
For Mac OS
®
X 10.2.4 or greater
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine
before restarting your
Macintosh
®
or if you are overwriting a
previously installed version of the Océ
software. If you encounter this problem
continue with the installation skipping Steps 9
to 12. You should select your Océ machine
from the Model pull-down list in the main
screen of ControlCenter2. (For details, see the
Software Use’s Guide on CD-ROM.)
Continued ...
Installing the Drivers & Software
Setting Up
the machine
Macintosh
®
Network
Network
Administrators

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English