Oki B411d User Manual

128 > B411/B431 Troubleshooting
14. The printer will warm up and commence printing when
ready. The page lost through the jam will normally be
reprinted.
Print quality problems
Before consulting a service representative regarding a print
quality problem, check the table below to see if there is a
solution, or something you might have overlooked.
Note
If the edge of the jammed paper protrudes (or can
be seen) from the exit, reinstall the image drum,
close the top cover and switch the printer on.
Remove the jammed paper from the exit when the
exit roller begins rotating after a few seconds after
switching on. However, if the jammed paper cannot
be removed, contact a service representative.
SYMPTOM PROBLEM SOLUTION
Blank sheets
printed.
Image drum cartridge
not properly installed.
Reinstall image drum
cartridge.
Empty or missing toner
cartridge.
Install new toner
cartridge.
Entire page
prints faintly.
Empty toner cartridge.
Pages get fainter when
toner is used up.
Install new toner
cartridge.
LED array is dirty. Clean LED array.
Page has grey
background.
Static electricity,
generally from dry
environments, causes
toner to stick to
background.
Change paper to a
smoother laser bond or
use a humidifier.
Page prints all
black.
Hardware problem. Contact service.

Oki B411d Specifications

General

Color	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Economical printing	Yes
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Processor model	405
Processor family	PowerPC
Maximum internal memory	320 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	781 sheets
Total number of input trays	1
Maximum number of input trays	2
Multi-Purpose tray input capacity	1 sheets
Bitmap fonts	OCR-A, OCR-B
Printer fonts	Bitmap, PCL
Printing colors	Black
Maximum duty cycle	60000 pages per month
Recommended duty cycle	3000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5e, PCL 6, PostScript 3
Envelopes sizes	7 3/4, 9, 10, C5, C6, DL
Maximum print size	216 x 356 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Power requirements	230V
Compatible operating systems	Windows 2000/2003/XP/Server 2008/Vista/7 Mac OS 10.3.9 +
AC input frequency	50 - 60 Hz
Power consumption (printing)	900 W
Power consumption (PowerSave)	8 W
Display	-
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-10 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Standard interfaces	Parallel, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Dimensions (WxDxH)	387 x 364 x 244.5 mm