Oki C5550 MFP User Manual

C5550 MFP User’s Guide
Getting started > 21
P APER RECOMMENDATIONS
Your MFP will handle a variety of print media, including a range
of paper weights and sizes, transparencies and envelopes. This
section provides general advice on choice of media, and explains
how to use each type.
The best performance will be obtained when using standard 20
~24 lb. (75~90g/m²) paper designed for use in copiers and laser
printers. A suitable types are
> Hammermill
®
Laser Printer Radiant White, 24 lb. US Bond
(90 g/m
²
)
> Xerox
®
4024, 20 lb. US Bond 20 lb. (75 g/m
²
)
> Oki
®
52206101 Bright White Proofing Paper, 32 lb. US
Bond (120 g/m
2
)
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of MFP. Window envelopes are not suitable.
> Oki
®
Premium Envelopes (size #10)
52206301 (100 count)
and
52206302 (500 count)
Transparencies should be of the type designed for use in copiers
and laser printers. We strongly recommend Oki transparencies
(Order No. 52205701). In particular, avoid office transparencies
designed for use by hand with marker pens. These will melt in the
fuser and cause damage.
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely
covered by labels. Other types of label stock may damage the
printer due to the labels peeling off during the printing process.
Suitable types are:

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB