MB280
- 54 -
11 - PC Features
Status of the connection
The status of the connection between the current device
and the PC is indicated by a colour. The following table
defines the possible states of the connection.
Device parameters
1 Select a device by clicking on its line in the list and
click on P
ROPERTIES to configure the scanning
parameters to be applied for this device when you
use the S
CAN TO function.
2 Select the desired scan M
ODE in the drop-down
menu.
3 Select the desired scan R
ESOLUTION in the drop-
down menu.
4 Click OK to confirm the new parameters.
Removing a device
1 Select the device from the list and click the minus
sign or R
EMOVE button.
2 To confirm the removal of the device, click Y
ES. To
cancel the removal, click N
O.
The device is no longer displayed in the list.
Display the consumable status
The following information will be available from the
C
ONSUMABLES tab:
• current consumables status,
• number of printed pages,
• number of scanned pages,
• number of sent and received pages.
Colour State
Yellow Connection in progress.
Green Connection established.
Red
The PC cannot connect to the device.
Check the USB connection.
To Next Page
Loading...
Need help?
General
