E-6 Section 1
Power Up
Turn the printer on:
• The printhead will cross back and forth along the
platen, and the pins will gently fire to determine the
printhead gap setting.
• The POWER light will come on.
• The ALARM light will also come on, but don’t be
concerned: it’s just telling you that there is no paper
loaded.
Load Paper
Your printer has provision for
• Single sheets (top feed)
• Continuous-forms (rear feed)
You can also install options:
• Cut Sheet Feeder (top feed) — holds 100 sheets
• Push and/or Pull Tractors for bottom feed of continu-
ous forms, including
– labels
– heavy card stock
– multi-part forms
4
See the instructions provided with the options for
information on installing them and on loading
paper with the option installed.
Your printer’s innovative, “smart” printhead automati-
cally detects and adjusts to the thickness of the paper
you’re using, so you don’t have to fuss with setting the
printhead gap when you change the type of paper or
print path you’re using.
See Appendix A for more details on the types and sizes
of print media you can use with your printer.
To Next Page
Loading...
Need help?
General