51
[Windows 2000]
From the Windows [Start] menu, select
Settings,
Control Panel,
Sound and MultiMedia, Audio, Master
Check that the volume of [Master] and [Wave] are not set to the minimum setting and that [Mute]
check box is not selected.
(
Play WAVE File).
Play WAVE File
From the Windows [Start] menu, select
Programs, Accessories,
(Windows 95/NT 4.0) Multimedia
(Windows 98/2000) Entertainment
Sound Recorder, File, Open
Then, open ":\Windows\Media\" and execute playback of any WAVE File (*.wave file).
If the WAVE file does not play or it is playing but the sound cannot be heard, consult your
sound card or PC vendor.
Cannot Connect to DS-2000
1. After connecting the DS-2000 to your PC using an USB cable, check that the LCD display of
the Digital Voice Recorder shows "REMOTE".
2. If "REMOTE" is not displayed, remove the communication cable from the DS-2000 and check
that the stop mode or the hold switch is not enabled.
3. Then, reconnect the communication cable to the DS-2000 and check that the LCD display
shows "REMOTE".
4. If the LCD display still does not show "REMOTE," the communication driver may not be
working properly. In such case, check the Communication Driver Problembelow.
To Next Page
Loading...
Need help?
General