To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...How to fix Olympus BX46 bulb not lighting?
If the bulb of your Olympus Microscope does not light, ensure the main switch is set to the “I” (ON) position. Also, check that the power cord is securely plugged into the power outlet and all connectors are properly connected. Verify the bulb is correctly attached and not burned out; replace it if necessary. If you are using a TL4, confirm its main switch is also set to “I” (ON).
Why is the field of view dark in my Olympus BX46?
If the field of view in your Olympus Microscope is dark, there could be several reasons. First, ensure that the LIM setting is appropriate. Check that the aperture and field iris diaphragms are opened wide enough. Make sure the light path selector knob is set to the correct position. Also, verify that the condenser is properly centered and its height is correctly adjusted. Finally, disengage any ND filters that may be in use.
General| Brand | Olympus |
|---|---|
| Model | BX46 |
| Category | Microscope |
| Language | English |
Covers safety for LED and Halogen lamp operations, emphasizing cooling and avoiding direct light exposure.
Details adjustments to improve observed image quality, including interpupillary distance and diopter.
Describes focusing block controls, including focusing, tension adjustment, fine adjustment knob replacement, and pre-focusing lever functions.
Information on stage operation, including placing specimens using slide holders.
Details how to adjust stage movement tension for X/Y axis knobs and how to rotate the stage.
Explains how to adjust the observation tube for comfortable viewing, including diopter rings and eye shades.
