4
Playback
44
Playback on TV
Use the video cable provided with the camera to playback recorded
images on your TV. Both a still picture and a movie can be played back.
1 Make sure that the TV and camera are turned off. Connect
the VIDEO OUT jack on the camera to the video input
terminal on the TV using the video cable.
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction manual.
3 Press the power switch to turn the camera on, and press
k.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
• The close-up playback, index display and slideshow functions can also be
used on a TV screen.
• The monitor on the camera turns off when the video cable is connected.
TIPS
• You are recommended to use the optional AC adapter when using the camera
with a TV.
Note
• The picture may appear off-center on the TV screen.
Connect to the TV’s video
input (yellow) terminal.
Video cable
VIDEO OUT jack
Connector cover
To Next Page
Loading...
Need help?
General
