55
Useful functions
5
Setting the time period to switch to the sleep mode (SLEEP)
The camera automatically switches to the sleep mode and stops operating
if not used for the specified time period. You can specify the time period
before the camera enters sleep mode.
The camera activates again by pressing l, k, or the shutter button.
[SLEEP] i g“How to use the menus” (P. 14)
1 Select [30sec], [1min], [3min] or
[10min], and press i.
• Press to exit the menu.
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a
minute after the monitor is used or continuous shots are taken to allow for
proper performance of the pixel mapping function.
[PIXEL MAPPING] i
g“How to use the menus” (P. 14)
1 Select [START], and press i.
• The [BUSY] bar is displayed during pixel
mapping. When pixel mapping is
finished, the screen returns to the menu.
• Press to exit the menu.
Note
• If you accidentally turn the camera off during pixel mapping, start again.
<
MEMORY FORMAT
30sec
1min
3min
10min
Checking the image processing functions (PIXEL MAPPING)
BUSY
To Next Page
Loading...
Need help?
General
