Direct printing (PictBridge)
58
6
Printing pictures
Use the USB cable provided to connect the camera to a PictBridge-compatible
printer.
1 Turn the printer on and plug the
printer end of the USB cable into the
printer’s USB port.
• For details of how to turn the printer on and
the position of the USB port, refer to the
printer’s instruction manual.
2 Plug the USB cable into the
camera’s USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection
screen for the USB connection is displayed.
3 Select [PRINT], and press i.
• [ONE MOMENT] is displayed and the
camera and printer are connected. The
[PRINT MODE SELECT] screen is
displayed on the monitor. Select the
print settings on the camera’s monitor.
gGo to “Printing pictures” (P. 59)
Connecting the camera to a printer
Note
• The [PRINT MODE SELECT] screen is not displayed when [PC] is selected in
Step 3. Disconnect the USB cable, and repeat the procedure from Step 1.
Connector cover
USB connector
To Next Page
Loading...
Need help?
General
