EasyManuals Logo
Home>Olympus>Digital Camera>FE-46

Olympus FE-46 User Manual

Olympus FE-46
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
EN
Erasing data completely
[ MEMORY FORMAT]/[ FORMAT]
E
SETUP X MEMORY FORMAT/FORMAT
Before formatting, check that no important
data is left in the internal memory or card.
Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use.
Submenu 2 Application
YES
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
NO Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
to the card [ BACKUP]
E
SETUP X BACKUP
Submenu 2 Application
YES
Backs up image data in the
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check
that the battery has suf cient power before
starting the backup.
Changing the display language [W]
E
SETUP X W
“Changing the display language” (p. 13)
Submenu 2 Application
Languages
*1
The language for the menus and
error messages displayed on the
monitor is selected.
*1
The available languages vary depending on the
country and/or region where the camera was
purchased.
Adjusting the CCD and the image
processing function [ PIXEL MAPPING]
E
SETUP X PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the B button when [START]
(Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
Menus for Other Camera Settings

Other manuals for Olympus FE-46

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Olympus FE-46 and is the answer not in the manual?

Olympus FE-46 Specifications

General IconGeneral
Megapixel12 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Image sensor size1/2.33 \
Maximum image resolution3968 x 2976 pixels
Digital zoom4 x
Optical zoom5 x
Combined zoom20 x
Focal length range6.3 - 31.5 mm
Number of aspheric elements4
Digital SLRNo
Aperture range (F-F)3.5 - 5.6
Camera shutter speed1/2 - 1/2000 s
Focal length (35mm film equivalent)36 - 180 mm
Focus adjustmentAuto
Auto focusing (AF) modesSpot Auto Focus
Closest focusing distance0.03 m
Macro focusing range (tele)0.6 - ∞ m
Macro focusing range (wide)0.2 - ∞ m
Auto Mode focusing range (tele)1.0 - ∞ m
Auto Mode focusing range (wide)0.6 - ∞ m
Internal memory19 MB
Compatible memory cardsxd
Motion JPEG frame rate30 fps
Maximum video resolution640 x 480 pixels
Display diagonal2.7 \
Display resolution (numeric)230000 pixels
USB version2.0
Scene modesCandlelight, Cuisine, Documents, Fireworks, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Sports, Sunset, Landscape (scenery)
Image editingresizing, rotating, trimming
White balanceauto, daylight, Fluorescent, Tungsten
Camera playbacksingle image, slide show
Self-timer delay12 s
Product colorBlack
Battery typeAA
Number of batteries supported2
Flash modesauto, fill-in, Flash off, Red-eye reduction
Weight and Dimensions IconWeight and Dimensions
Depth27.8 mm
Width98 mm
Height61.6 mm
Weight128 g

Related product manuals