Olympus FL 50R User Manual

1
2
10
EN
How to remove
1 Loosen the lock ring completely, then slide the electronic flash out
of the hot shoe.
2 Attach the hot shoe cover to the camera.
Using with a camera not equipped with hot shoe
 If the camera has an external flash connector, connect the electronic flash using the
flash bracket and bracket cable (optional).
 The electronic flash can be used as a wireless flash with cameras compatible with
the Olympus wireless RC flash system. g “Wireless flash” (P.33)
 The electronic flash can be used as a slave flash with cameras equipped with the
slave mode or manual flash mode. g “Slave flash” (P.40)
4 Slide the electronic flash all the way into
the hot shoe until it stops with a click
(1).
5 Turn the lock ring as far as it will go in
the direction of LOCK (2).
e00r2062cs2j.indb10e00r2062cs2j.indb10 2007/08/0114:43:562007/08/0114:43:56

Olympus FL 50R Specifications

General

Type	Slave flash
Product color	Black
Channels quantity	4 channels
Flash guide number	50 m
Approximate recycling time	1.3 s
Camera brands compatibility	Olympus

Weight and Dimensions

Depth	141 mm
Width	78 mm
Height	107 mm
Weight	385 g