Olympus FL 50R User Manual

19
EN
1 The control panel shows the light control
range according to the camera’s setup.
2 Confirm that the distance to the subject
is within the light control range.
 If it is not within the light control range,
change the distance to the subject or the
camera’s setup.
 The light control range varies according
to the camera’s setup (ISO sensitivity,
aperture value, lens focal length and
shutter speed).
3 When flash activation has been
performed correctly, the AUTO CHECK
lamp blinks for about 5 seconds after
the shutter is released.
Mode
Light control
range
Firing angle
AUTO
CHECK
lamp
x
Notes
 With Super FP flash the highest guide number will be lower than in TTL
AUTO mode. As a result, the light control range will be shortened.
e00r2062cs2j.indb19e00r2062cs2j.indb19 2007/08/0114:43:582007/08/0114:43:58

Olympus FL 50R Specifications

General

Type	Slave flash
Product color	Black
Channels quantity	4 channels
Flash guide number	50 m
Approximate recycling time	1.3 s
Camera brands compatibility	Olympus

Weight and Dimensions

Depth	141 mm
Width	78 mm
Height	107 mm
Weight	385 g