Using the alarm [ALARM CLOCK]
......._ SETUP _ ALARM CLOCK .......
When [Q] has not been set, [ALARM CLOCK] is not available.
(_ When [DUALTIME] (p. 59) is set to [ON], the alarm is activated at the date and time set in
[DUALTIME].
_s
-- -- The alarm is canceled.
TIME Proceeds to the
setting screen*_.)
The alarm is activated once according to the time,
ONE TIME SNOOZE'2 _EF/ON the sound type and the volume settings that are
SOUND TYPE }_2/3 made here.
VOLUME :_W!HIGH
Submenus 3 and 4 can be set in the
DAILY The alarm is activated daily at the same settings.
same way as [ONE TIME].)
The setting procedure is identical to that in "Setting the date and time" (p. 12)
2 In this setting, even if the alarm isstopped once, the alarm will be activated every 5 minutes, up to 7 times.
To check the alarm time, press the DISP, button while the camera is turned off. The current and
alarm set times are displayed for approx. 3 seconds.
To activate the alarm
After making the detaited settings of
[ONE TIME] or [DAILY], press the POWER
button to turn off the camera.
To stop the alarm
When the alarm is activated, press any button
to shut off the alarm and turn off the camera.
(_,_ When ]SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after I minute of no operation.
Selecting a video signal system to match your TV [VIDEO OUT]
.......t'T SETUR _ _IDEQ QUI .............
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signai type.
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, etc.
PAL Connecting the camera to a TV in European countries, China, etc.
_ The factory default settings differ according to the region where the camera is sold.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!i_!i_!_!_i!i!iii:!EN
To Next Page
Loading...
Need help?
General
