73
EN
Connecting to a smartphone
1
Start the OI.Share App installed on your smartphone.
• You can also connect to smartphones using OI.Track.
2
Highlight [Connection to Smartphone] in the Playback Menu
and press A.
• You can also launch [Connection to Smartphone] by pressing and holding
the button when the camera is ready to shoot.
3
Follow the operation guide displayed on the camera monitor to
prepare for Wi-Fi connection.
4
Use the smartphone that the OI.Share is activated to read the
QR code displayed in the camera monitor. The connection
automatically starts.
Failure of reading QR code
Set a SSID and a password in the Wi-Fi
setting of a smartphone before the connection
(The SSID and the password are displayed at
the lower left of QR code screen.).
For the Wi-Fi setting for your smartphone,
read the instruction manual of the
smartphone.
QR code
End Wi-Fi
Preparing Wi-Fi Connection
Password
SSID
: 00000000
: X-XX-X-XXXXXXXXX
Connecting to your
smartphone.
Read QR code by
'OLYMPUS Image Share'.
3/3
SSID
Password
• To end the connection, press the button of the camera.
Error message during Wi-Fi connection
Connect the camera to the smartphone again.
1 Turn off the Wi-Fi function of your smartphone.
2 Turn on the Wi-Fi function again. Select the SSID for TG-5 before another
connection is made.
To Next Page
Loading...
Need help?
General
