1
19
EN
Preventing accidental operation
Setting the voice recorder to HOLD mode maintains the current operation and disables button
operations. HOLD mode is a handy feature for preventing unintentional operation from
accidental button presses when the voice recorder is carried in a bag or pocket. It is also useful
for preventing the voice recorder being accidentally stopped during recording.
Setting HOLD mode
1
Slide the
POWER
/
HOLD
switch to
the [
HOLD
] position.
• [Hold] appears in the display, and the
recorder enters HOLD mode.
Releasing HOLD mode
1
Slide the
POWER
/
HOLD
switch to
position A shown below.
NOTE
• When any button is pressed during HOLD mode, [Hold] appears in the display for 2
seconds. No other operation is performed.
• Setting HOLD mode during voice recorder playback (or recording) continues the playback
(or recording) operation and prevents any other operation from being performed (the
voice recorder stops when playback ends, or recording stops when there is no more
available memory).
Preventing accidental operation
To Next Page
Loading...
Need help?
General
