Omron C200H Series User Manual

by Change Model on CX-Programmer.
You can check the program by selecting Program - Compile (Program Check). The Output Window shows the
checking results.
(4) The PLC memory data cannot be maintained when PLC model is changed. Open the PLC Memory window for
both C200H and CS-series PLCs and copy and paste the necessary memory data after conversion
.
Select the necessary PLC Memory on the C200H PLC Memory window and
copy and paste it onto the PLC Memory of the CS series PLC.
(5) The I/O allocation of C200H-series is partly different from that CS1-series. Refer to Appendix B. Change of data
area allocation and modify the ladder program.
(6) The PLC settings of C200H-series are partly different from that of CS1-series. Refer to Appendix C. Change in
PLC s
ettings and change the PLC settings.
(7) Select Program - Compile to check the program. If an error is detected, correct it.
(8) Save the program by specifying the project name. (Select File - Save As.)
󲨩󲨨

Omron C200H Series Specifications

General

Brand	Omron
Model	C200H Series
Category	Controller
Language	English