Omron C200H Series User Manual

Appendix E. Table of Input/Output Units
- Input Unit
(1)If different terminal block or connector is used, you have to change the wiring.
(2)If the input circuit specification is not the same, check if there is no problem in operation.
(3)If the number of circuit is different (increased), wire and connect the terminals and each common terminals.
(4)If the current consumption is different, check if enough power supply capacity is provided.
(5)C200H-series Units can be used with CS1-series CPU Units.
(6)Refer to related manuals for details, even if functions of C200H-series are supported by CS1-series Units,
since a part of specifications may differ.
DC Input Unit
C200H-series Unit Corresponding CS-series Unit Description Difference
C200H-ID211 CS1W-ID211
12 to 24 VDC,10mA, Terminal
block, 8 inputs
24VDC, 7mA, Terminal block, 16
inputs
DC Input Unit with terminal
block for 8 inputs
Replace this unit with a DC
Input Unit with 16 inputs.
1) Terminal block
2) Input points (8 -> 16 points)
3) Input circuit specification
Input voltage range (12 to 24 VDC ->
24VDC)
Input impedance (2kΩ-> 3.3kΩ)
ON Voltage(10.2VDC->14.4VDC)
OFF Voltage(3VDC->5VDC)
4) Internal current consumption(5VDC:
10mA->100mA)
C200H-ID212 CS1W-ID211
24 VDC，7mA，Terminal
block, 16 inputs
24VDC, 7mA, Terminal block, 16
inputs
DC Input Unit with terminal
block for 16 inputs.
1) Terminal block
2) Number of circuit (16 points/common x1
circuit -> 8 points/common x2 circuits)
3) Input circuit specification
Input impedance(3kΩ->3.3kΩ)
4) Internal current consumption
(5VDC:10mA->100mA)
C200H-ID215 CS1W-ID231
24 VDC, 4.1mA, Connector 32
inputs (Special I/O G)
24VDC, 6mA, Connector, 32
inputs
DC Input Unit with connector
for 32 inputs.
1) Connector
2) (8 points/common x4 circuits->16
points/common x2 circuits)
3) Input circuit specification
Input impedance(5.6kΩ->3.9kΩ)
ON Voltage(DC14.4V->DC15.4V)
4)Internal current consumption
(5VDC:130mA->150mA)
C200H-ID216 CS1W-ID231
24 VDC, 4.1mA, Connector,
32 inputs (Group-2)
24VDC, 6mA, Connector, 32
inputs
DC Input Unit with connector
for 32 inputs.
1) Number of circuit(32 points/common x1
circuit ->16 points/common x2 circuits)
2) Input circuit specification
Input impedance(5.6kΩ->3.9kΩ)
ON Voltage(DC14.4V->DC15.4V)
3) Internal current consumption
(5VDC:100mA->150mA)
C200H-ID218 CS1W-ID231
24 VDC, 6.0mA, Connector,
32 inputs (Group-2)
24VDC, 6mA, Connector, 32
inputs
DC Input Unit with connector
for 32 inputs.
1) Number of circuit (32 points/common x1
circuit ->16 points/common x2 circuits)
2) Internal current consumption
(5VDC:100mA->150mA)
C200H-ID111 CS1W-ID261
12 VDC, 4.1mA, Connector,
64 inputs (Group-2)
24VDC, 6mA, Connector, 64
inputs
DC Input Unit with connector
for 64 inputs.
1) Number of circuit (32 points/common x2
circuit->16 points/common x4 circuits)
2) Input circuit specification
Input voltage(12VDC->24VDC)
Input impedance (2.7kΩ->3.9kΩ)
ON Voltage(8VDC->15.4VDC)
OFF Voltage(3VDC->5VDC)
3) Internal current consumption
(5VDC:120mA->150mA)
C200H-ID217 CS1W-ID261
24 VDC, 4.1mA, Connector,
64 inputs (Group-2)
24VDC, 6mA, Connector, 64
inputs
DC Input Unit with connector
for 64 inputs.
1) Number of circuit (32 points/common x2
circuit ->16 points/common x4 circuits)
2) Input circuit specification
Input impedance (5.6kΩ->3.9kΩ)
ON Voltage (14.4VDC->15.4VDC)
Internal current consumption
(5VDC:120mA->150mA)
C200H-ID219 CS1W-ID261
24 VDC, 6.0mA, Connector,
64 inputs (Group-2)
24VDC, 6mA, Connector, 64
inputs
DC Input Unit with connector
for 64 inputs.
1) Number of circuit (32 points/common x2
circuit ->16 points/common x4 circuits)
2) Internal current consumption
(5VDC:120mA->150mA)
󲨩󲨭

Omron C200H Series Specifications

General

Brand	Omron
Model	C200H Series
Category	Controller
Language	English