25
2-2-6 Standard I/O Units
The following Standard I/O Units are available.
Input Units
Name Model number Specifications No. of
points
DC Input Unit
C200H-ID211 12 to 24 VDC 8 pts
C200H-ID212 24 VDC 16 pts
AC Input Unit C200H-IA121 100 to 120 VAC 8 pts
C200H-IA122/IA122V 100 to 120 VAC 16 pts
C200H-IA221 200 to 240 VAC 8 pts
C200H-IA222/IA222V 200 to 240 VAC 16 pts
AC/DC Input Unit C200H-IM211 12 to 24 VAC/DC 8 pts
C200H-IM212 24 VAC/DC 16 pts
Note The C200H-ID001/002 cannot be used on the following Backplanes: C200HW-
BCjj1/BIjj1.
Output Units
Name Model number Specifications No. of
points
Contact Output Unit C200H-OC221 2 A, 250 VAC/24 VDC (For resistive loads) 8 pts
C200H-OC222 2 A, 250 VAC/24 VDC (For resistive loads) 12 pts
C200H-OC225 2 A, 250 VAC/24 VAC (For resistive loads) 16 pts
C200H-OC223 2 A, 250 VAC/24 VDC (For resistive loads)
Independent commons
5 pts
C200H-OC224 2 A, 250 VAC/24 VDC (For resistive loads)
Independent commons
8 pts
C200H-OC222V 2 A, 250 VAC/24 VDC (For resistive loads) 12 pts
C200H-OC226 2 A, 250 VAC/24 VDC (For resistive loads) 16 pts
C200H-OC224V 2 A, 250 VAC/24 VDC (For resistive loads)
Independent commons
8 pts
Transistor Output
C200H-OD411 1 A, 12 to 48 VDC 8 pts
Unit
C200H-OD211 0.3 A, 24 VDC 12 pts
C200H-OD212 0.3 A, 24 VDC 16 pts
C200H-OD213 2.1 A, 24 VDC 8 pts
C200H-OD214 0.8 A, 24 VDC; source type (PNP); with load short protection 8 pts
C200H-OD216 5 to 24 VDC; source type (PNP) 8 pts
C200H-OD217 5 to 24 VDC; source type (PNP) 12 pts
C200H-OD21A 1.0 A, 24 VDC; source type (PNP); with load short protection 16 pts
Triac Output Unit C200H-OA221 1 A, 250 VAC 8 pts
C200H-OA222V 0.3 A, 250 VAC 12 pts
C200H-OA223 1.2 A, 250 VAC 8 pts
C200H-OA224 0.5 A, 250 VAC 12 pts
Optional Products
The following optional products are available for use with Standard I/O Units.
• I/O Unit Cover: C200H-COV11
Cover for 10-pin terminal block.
• Space Unit: C200H-SP001
Used for vacant slots.
Units
Section 2-2
To Next Page
Loading...
Need help?
General
