Omron CJ2M-CPU35 User Manual

5
．
Applicable Devices and Device Configuration
6
5.2. Device Configuration
The hardware components to reproduce the connection procedures in this document are as
follows:
Manufacturer Name Model Version
OMRON
Serial Communications Unit
CJ1W-SCU42
Ver.2.0
OMRON
CPU Unit
CJ2M-CPU12
Ver.2.0
OMRON
Power Supply Unit
CJ1W-PA202
OMRON
CX-One
CXONE-AL[][]C-V4
/AL[][]D-V4
Ver.4.[][]
OMRON
CX-Programmer
(Included in CX-One)
Ver.9.60
OMRON
CX-Protocol
(Included in CX-One)
Ver.1.99
OMRON
CX-Programmer project file
(Ladder program)
P652_CJ_PMCR232C_OMR
ON_ZW-7000_EV100.cxp
Ver.1.00
OMRON
CX-Protocol project file
(Protocol macro data)
P652_CJ_PMCR232C_OMR
ON_ZW-7000_EV100.psw
Ver.1.00
-
Personal computer (OS: Windows 7)
-
-
USB cable
(USB 2.0 type B connector)
-
OMRON
RS-232C cable
(for PLC or programmable terminal)
ZW-XPT2
OMRON
Sensor Controller
ZW-7000
Ver.2.020
OMRON
Sensor Head
ZW-S7030
OMRON
Calibration ROM
(supplied with Sensor Head)
OMRON
24 VDC power supply (for Sensor
Controller) (DC24V 2.5A 60W）
S8VS-06024
Precautions for Correct Use
Prepare latest project files of both CX-Programmer and CX-Protocol beforehand.
To obtain a project file, contact your OMRON representative.
24 VDC power supply
(for Sensor Controller)
RS-232C cable (for PLC or
programmable terminal)
CJ2M-CPU12
CJ1W-SCU42
Personal computer
(CX-One installed,
OS: Windows 7)
USB cable
Calibration ROM
ZW-7000
ZW-S7030

Omron CJ2M-CPU35 Specifications

General

Brand	Omron
Model	CJ2M-CPU35
Category	Controller
Language	English