Omron CS1G-CPU42H Replacement Guide From C200H To Cs

19
Appendix E. Table of Input/Output Units
■ Input Unit
(1) If a different type of terminal block or connector is used, change the wiring.
(2) If the input specifications differ, make sure that the system operates correctly.
(3) If the number of circuits increases, rewire the terminals to each common terminal.
(4) If internal current consumption is different, make sure the power supply capacity is large enough.
(5) C200H-series Units can be used with CS1-series CPU Units.
(6) Refer to the related manuals for details. Although CS-series Units have basic functions of C200H-series Units,
some specifications may differ.
< DC Input Units >
C200H-series Unit
Corresponding CS-series Unit
Description
Difference
C200H-ID211
CS1W-ID211
DC Input Unit with terminal
block for 8 inputs.
Replace this unit with a DC
Input Unit with 16 inputs.
1) Terminal block
2) Input points (8 points → 16 points)
3) Input circuit specifications
Input voltage range
(12 to 24 VDC → 24VDC)
Input impedance (2 kΩ → 3.3 kΩ)
ON voltage (10.2 VDC → 14.4 VDC)
OFF voltage (3 VDC → 5 VDC)
4) Internal current consumption
(5 VDC: 10 mA → 100 mA)
12 to 24 VDC, 10 mA, Terminal
block, 8 inputs
24 VDC, 7 mA, Terminal block,
16 inputs
C200H-ID212
CS1W-ID211
DC Input Unit with terminal
block for 16 inputs.
1) Terminal block
2) No. of circuits (16 points/common x 1 circuit
→ 8 points/common x 2 circuits)
3) Input circuit specification
Input impedance (3 kΩ → 3.3 kΩ)
4) Internal current consumption
(5 VDC: 10 mA → 100 mA)
24 VDC, 7 mA, Terminal block,
16 inputs
24 VDC, 7 mA, Terminal block,
16 inputs
C200H-ID215
CS1W-ID231
DC Input Unit with connector
for 32 inputs.
1) Connector
Use the XW2Z-S010 Conversion Cable to
reuse the connecting cable.
2) No. of circuits (8 points/common x 4 circuits
→ 16 points/common x 2 circuits)
3) Input circuit specifications
Input impedance (5.6 kΩ → 3.9 kΩ)
ON voltage(14.4 VDC → 15.4 VDC)
4) Internal current consumption
(5 VDC: 130 mA → 150 mA)
24 VDC, 4.1 mA, Connector,
32 inputs (Special I/O)
24 VDC, 6 mA, Connector,
32 inputs
C200H-ID216
CS1W-ID231
DC Input Unit with connector
for 32 inputs.
1) No. of circuits (32 points/common x 1 circuit
→ 16 points/common x 2 circuits)
2) Input circuit specifications
Input impedance (5.6 kΩ → 3.9 kΩ)
ON voltage (14.4 VDC → 15.4 VDC)
3) Internal current consumption
(5 VDC: 100 mA → 150 mA)
24 VDC, 4.1 mA, Connector,
32 inputs (Group-2)
24 VDC, 6 mA, Connector,
32 inputs
C200H-ID218
CS1W-ID231
DC Input Unit with connector
for 32 inputs.
1) No. of circuits (32 points/common x 1 circuit
→ 16 points/common x 2 circuits)
2) Internal current consumption
(5 VDC: 100 mA → 150 mA)
24 VDC, 6 mA, Connector,
32 inputs (Group-2)
24 VDC, 6 mA, Connector,
32 inputs
C200H-ID111
CS1W-ID261
DC Input Unit with connector
for 64 inputs.
1) No. of circuits (32 points/common x 2 circuits
→ 16 points/common x 4 circuits)
2) Input circuit specifications
Input voltage (12 VDC → 24 VDC)
Input impedance (2.7 kΩ → 3.9 kΩ)
ON voltage (8 VDC → 15.4 VDC)
OFF voltage (3 VDC → 5 VDC)
3) Internal current consumption
(5 VDC: 120 mA → 150 mA)
12 VDC, 4.1 mA, Connector,
64 inputs (Group-2)
24 VDC, 6 mA, Connector,
64 inputs
C200H-ID217
CS1W-ID261
DC Input Unit with connector
for 64 inputs.
1) No. of circuits (32 points/common x 2 circuits
→ 16 points/common x 4 circuits)
2) Input circuit specifications
Input impedance (5.6 kΩ → 3.9 kΩ)
ON voltage (14.4 VDC → 15.4 VDC)
3) Internal current consumption
(5 VDC: 120 mA → 150 mA)
24 VDC, 4.1 mA, Connector,
64 inputs (Group-2)
24 VDC, 6 mA, Connector,
64 inputs
C200H-ID219
CS1W-ID261
DC Input Unit with connector
for 64 inputs.
1) No. of circuits (32 points/common x 2 circuits
→ 16 points/common x 4 circuits)
2) Internal current consumption
(5 VDC: 120 mA → 150 mA)
24 VDC, 6 mA, Connector,
64 inputs (Group-2)
24 VDC, 6 mA, Connector,
64 inputs

Omron CS1G-CPU42H Specifications

General

Brand	Omron
Model	CS1G-CPU42H
Category	Controller
Language	English