Omron E5CC Quick Start Guide

Page 12 of 37
Using CX-Thermo
Copying Parameters with the Master Device Online
This describes how to duplicate the parameters on the master device to other devices.
Make sure that all of the components are wired and power is applied.
Ensure the CS1W-CIP31 cable is connected.
Open CX-Thermo and click no.
Figure 9: CX-Thermo Start Up Screen

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66