Omron E5CN Guide

onlinecomponents.com
E5CN
E5CN

INPUT TYPE
Using a Thermocouple Input Type
When using a thermocouple input type, follow the specifications listed in the following table.
Input type
Specifications Set Value Input Temperature Range
Thermocouple K
0 --200 to 1300 (°C) /--300 to 2300 (°F)
1 --20.0 to 500.0 (°C) /0.0 to 900.0 (°F)
J
2 --100 to 850 (°C) /--100 to 1500 (°F)
3 --20.0 to 400.0 (°C) /0.0 to 750.0 (°F)
T 4 --200 to 400 (°C) /--300 to 700 (°F)
E 5 0to600(°C) /0 to 1100 (°F)
L 6 --100 to 850 (°C) /--100 to 1500 (°F)
U 7 --200 to 400 (°C) /--300 to 700 (°F)
N 8 --200 to 1300 (°C) /--300 to 2300 (°F)
R 9 0 to 1700 (°C) /0 to 3000 (°F)
S 10 0 to 1700 (°C) /0 to 3000 (°F)
B 11 100 to 1800 (°C) /300 to 3200 (°F)
Non-contact temperature sensor ES1A
K10to70  C
12 0to90(°C) /0 to 190 (°F)
K60to120  C
13 0to120(°C) /0 to 240 (°F)
K115 to 165  C
14 0to165(°C) /0 to 320 (°F)
K160 to 260  C
15 0to260(°C) /0 to 500 (°F)
Analog input 0to50mV 16 One of following ranges depending on the
results of scaling: 1999 to 9999, 199.9 to
999.9
Note: The initial settings are: 0: --200 to 1300  C/--300 to 2300  F.
Using a Platinum Resistance Thermometer Input Type
When using the platinum resistance thermometer input type, follow the specifications listed in the following table.
Input type
Specifications Set Value Input Temperature Range
Platinum resistance thermometer Pt100
0 --200 to 850 (°C) /--300 to 1500 (°F)
1 --199.9 to 500.0 (°C)/--199.9 to 900.0 (°F)
2 0.0 to 100.0 (°C) /0.0 to 210.0 (°F)
JPt100
3 --199.9 to 500.0 (°C)/--199.9 to 900.0 (°F)
4 0.0 to 100.0 (°C) /0.0 to 210.0 (°F)
Note: 1. The initial settings are: 0: Pt100 --200 to 850  C/--300 to 1500  F.
2. The ES1A Non-contact Temperature Sensor will be available soon.

Omron E5CN Specifications

General

Brand	Omron
Model	E5CN
Category	Temperature Controller
Language	English