To Next Page

To Previous Page

6.1 Variable Area (Setting Range) List

6-3

0500 Operation/adjustment

protect

H'00000000 (0): No restrictions in operation and adjustment

levels

H'00000001 (1): Move to adjustment level is prohibited.

H'00000002 (2): Display and change of only “PV” and “PV/

SP” parameters is allowed.

H'00000003 (3): Display of only “PV” and “PV/SP” parame-

ters is allowed.

Protect

0502 Initial setting/communi-

cations protect

H'00000000 (0): Move to initial setting/communications set-

ting level is allowed. (Move to advanced

function setting level is displayed.)

H'00000001 (1): Move to initial setting/communications set-

ting level is allowed. (Move to advanced

function setting level is not displayed.)

H'00000002 (2): Move to initial setting/communications set-

ting level is prohibited.

0504 Setup change protection H'00000000 (0): OFF (Changing of setup on controller dis-

play is allowed.)

H'00000001 (1): ON (Changing of setup on controller display

is prohibited.)

0508 Move to protect level H'FFFFF831 to H'0000270F (−1999 to 9999)

050A Password to move to pro-

tect level

H'FFFFF831 to H'0000270F (−1999 to 9999)

(Can only be set. The monitor value is always H’00000000.)

050C Parameter mask enable H'00000000 (0): OFF

H'00000001 (1): ON

Address Parameter name Setting (monitor) value Level

Omron E5CN Manual

Other manuals for Omron E5CN