Omron E5EX–H User Manual

E5EX–H
E5EX–H
4
Dimensions
Note: All units are in millimeters.
Temperature Controller
Panel Cutout
Mounting
screw
Side-by-side Mount -
ing of N Controllers
120 min.
Current Transformer
E54–CT1 E54–CT3
5.8
dia.
12
dia.
2.36 dia
2.8 dia
Two, 3.5 dia. holes
Nomenclature
Process V alue (PV) Display
Displays not only the process temperature but also indi-
cates the parameter being displayed on the SV display
and error messages.
Set V alue (SV) Display
Displays set temperature and other parameters.
Alarm Indicator
Lit when the alarm output is ON.
Auto-tuning Key
Press
this key for 1 second or longer when PID operation
has been designated to start auto-tuning. Press this key for
1 second or more during auto-tuning to stop auto-tuning.
Up Key
When pressed, increases the set temperature or other
parameters. Successively increases the value when
held
down.
Down Key
When
pressed, decreases the set tem -
perature
or other parameters. Succes -
sively decreases the value when held
down.
Display Key
Use this key when shifting the dis -
play
to the next parameter .
Level Key
Press for 2 seconds minimum to
change levels to set different
groups
of parameters.
Output Indicator
Lit
when the control output is ON.
Auto-tuning Indicator
Flashes on and off about every
second when auto-tuning is tak-
ing
place.
Heater Burnout Indicator
Lights when a heater burnout is
detected
and stays lit until reset.
Sensor Error Indicator
Lights when sensor malfunctions
Front Cov-
er

Omron E5EX–H Specifications

General

Brand	Omron
Model	E5EX–H
Category	Temperature Controller
Language	English