H3DEH3DE
Timing Chart —
continued from previous page
Operating
mode
Timing chart
D:
Signal
OFF-delay
Power (A
1
and A
2
)
Start (B
1
and A
2
)
(See Note.)
Power indicator
tt t -- a t -- a t t -- a
Basic operation
Power
Start
Output
t
* Start input is valid and re-triggerable while the
Timer is i n operation.
Output relay: NC
15 and 16
(25 and 26)
Output relay: NO
(output indicator)
15 and 18
(25 and 28)
*
E: Interval
Power
Start
Output
t
Basic operation
t--a
tt
Power (A
1
and A
2
)
Start (B
1
and A
2
)
(See Note.)
Power indicator
t
t--a
* For power-on operation, impose voltage to the
Start input. The Timer starts operating at the
moment the power is turned on.
** Start input is valid and re-triggerable while the
Timer is i n operation.
Output relay: NC
15 and 16
(25 and 26)
Output relay: NO
(output indicator)
15 and 18
(25 and 28)
*
**
G:
Signal
ON/OFF-
delay
Power (A
1
and A
2
)
Start (B
1
and A
2
)
(See Note.)
Power indicator
Power
Start
Output
Basic operation
* Start input is valid and re-triggerable while the
Timer is i n operation.
t t t t
Output relay: NC
15 and 16
(25 and 26)
Output relay: NO
(output indicator)
15 and 18
(25 and 28)
*
J:
One-shot
output
(ON delay)
Power (A
1
and A
2
)
Start (B
1
and A
2
)
(See Note.)
Power indicator
Power
Start
Output
Basic operation
* For power-on operation, impose voltage to the
Start input. The Timer starts operating at the
moment the power is turned on.
** Start input is valid and re-triggerable while the
Timer is i n operation.
tt tt--a t--a
Approx.
1±0.6 s
(fixed)
Approx.
1±0.6 s
(fixed)
Approx.
1±0.6 s
(fixed)
t Approx. 1±0.6 s
(fixed)
Output relay: NC
15 and 16
(25 and 26)
Output relay: NO
(output indicator)
15 and 18
(25 and 28)
*
**
Note: The start input of the H3DE-M1 or H3DE-M2 model is activated by applying a voltage to B1 and A2 terminals.
The voltage can be applied by turning on the contact between B1 and A1 (Refer to Terminal Arrangement).
To Next Page
Loading...
Need help?
General
